Document Type : Review Article
Authors
anna university
Abstract
In this paper, the results of a finite element analysis are carried out on new stator geometry of a three phase longitudinal flux Linear Switched Reluctance Motor (LSRM). In the new geometry, pole shoes are affixed to the stator poles. Static and dynamic characteristics for the proposed structure have been highlighted. Motor performance for variable load conditions is discussed. The 2-Dimensional (2-D) finite element analysis (FEA) and the experimental results of this paper prove that LSRMs are one of the strong candidates for linear propulsion drive
Keywords
[1] Miller T.J.E.; Switched Reluctance Motor and Their Control. Hillsboro, OH: Magna Phys., (1993)
[2] Byeong-Seok L., Han-Kyung B., Praveen V. and R. Krishnan; “Design of a Linear Switched Reluctance Machine”, IEEE Trans. Ind. Appl., Vol. 36, No. 6, pp. 1571–1580, (November/December 2000)
[3] Chayopitak N. and Taylor D.G.; “Design of Linear Variable Reluctance Motor Using Computer-aided Design Assistant”, in Proc. IEEE Int. Conf. Elect. Mach. Drives, pp. 1569–1575, (May 2005)
[4] Sun Z., Cheung N.C., Pan J., Zhao S.W. and Gan W.C.; “Design and Simulation of a Magnetic Levitated Switched Reluctance Linear Actuator System for High Precision Application”, in Proc. IEEE ISIE, pp. 624–629, (June 30–July 2 2008)
[5] Deshpande U. S., Cathey J. J. and Richter E.; “High-force Density Linear Switched Reluctance Machine”, IEEE Trans. Ind. Appl., Vol. 31, No. 2, pp. 345–352, (March/April 1995)
[6] Pan J., Cheung N.C. and Yang J.; “High-precision Position Control of a Novel Planar Switched Reluctance Motor,” IEEE Trans. Ind. Electron., Vol. 52, No. 6, pp. 1644–1652, (December. 2005)
[7] Zhao S.W., Cheung N.C., Gan W.C., Yang J. M. and Pan J. F.; “A Self-tuning Regulator for the High-precision Position Control of a Linear Switched Reluctance Motor”, IEEE Trans. Ind. Electron., Vol. 54, No. 5, pp. 2425–2434, (October. 2007)
[8] Kolomeitsev L., Kraynov D., Pakhomin F., Rednov F., Kallenbach E., Kireev V., Schneide T.R. and Böcker J.; “Linear Switched Reluctance Motor as High Efficiency Propulsion System for Railway Vehicles”, in Proc. SPEEDAM, pp. 155–160, (2008)
[9] Lim H.S. and Krishnan R.; “Ropeless Elevator with Linear Switched Reluctance Motor Drive Actuation Systems,” IEEE Trans. Ind. Electron., Vol. 54, No. 4, pp. 2209–2218, (August 2007)
[10] Lim H. S., Krishnan R. and Lobo N. S.; “Design and Control of a Linear Propulsion System for an Elevator Using Linear Switched Reluctance Motor Drives”, IEEE Trans. Ind. Electron., Vol. 55, No. 2, pp. 534–542, (February 2008)
[11] Lobo N. S., Lim H. S. and Krishnan R.; “Comparison of Linear Switched Reluctance Machines for Vertical Propulsion Application: Analysis, Design, and Experimental Correlation”, IEEE Trans. Ind. Appl., Vol. 44, No. 4,pp. 1134–1142, (July/August 2008)
[12] Arumugam R., Lindsay J.F. and Krishnan R., “Sensitivity of Pole Arc/Pole Pitch Ratio on Switched Reluctance Motor Performance,” in Conf. Rec. IEEE IAS Annu. Meeting, Pittsburgh, PA, Vol. 1, pp. 50–54, (October 1988)
[13] Amoros J.G., and Andrada P.; “Sensitivity Analysis Of Geometrical Parameters on a Double-sided Linear Switched Reluctance Motor,” IEEE Transactions on Industrial Electronics, Vol. 57, No. 1, pp. 311-319, (January 2010)
[14] Schramm D., Williams B.W. and Green T.C., “Torque Ripple Reduction of Switched Reluctance Motors by Phase Current Optimal Profiling”, Proc. IEEE PESC’92, pp. 857–860, (1992)
[15] Moallem M., Ong C.M. and Unnewehr L.E., “Effect of Rotor Profiles on The Torque of a Switched Reluctance Motor”, IEEE Trans. on Ind. Applicat., Vol. 28, No. 2, pp. 364-369, (March/April 1992)
[16] Hussain I. and Ehsani M.; “Torque Ripple Minimization in Switched Reluctance Motor Drives by Pwm Current Control”, IEEE Trans., on Power Electronics, Vol. 11, No. 1, pp: 83-88, (January 1996)
[17] Rabinovici R.; “Torque Ripple, Vibrations, and Acoustic Noise in Switched Reluctance Motors”,, HAIT Journal of Science and Engineering B, Vol. 2, Issues 5-6, pp. 776-786, (July 2005)
[18] Neagoe C., Foggia A. and Krishnan R.; “Impact of Pole Tapering on the Electromagnetic Force of The Switched Reluctance Motor”, in Conf. Rec. IEEE Electric Machines and Drives Conference, pp. WA1/2.1- WA1/2.3, (1997)
[19] Bae Han-Kyung, Lee B.S., Vijayaraghavan Praveen, Krishnan R.; “A Linear Switched Reluctance Motor: Converter and Control”, IEEE Transactions on Industry Applications, Vol. 36, No. 5, (September/October 2000)
)