Document Type : Review Article
Authors
Abstract
In this paper, voltage sag is compensated by the DVR (Dynamic Voltage Restorer) in distribution systems. This device is applied between the sensitive load and the supply in order to inject voltage in series to correct the voltage sag. Subsequently, all the other various DVR compensation techniques in the distribution system are explained. Due to the restriction of the energy storage in DVR’s capacitors, it is essential to minimize the active power injected by the DVR. Thus, a minimum active power injection method is proposed to compensate the voltage sag. Performance of this method is evaluated under balanced and unbalance voltage sag in a distribution system.最小有功注入策略的使用由DVR來補償電壓暫降摘要在本文中，電壓驟降由DVR（動態電壓恢復器）的配電系統補償。該裝置是為了注入串聯電壓來校正電壓驟降的敏感負載和電源之間。隨後，所有的其它各種的DVR補償在配電系統的技術進行說明。由於能量存儲在DVR的電容器的限制，這是至關重要的，以盡量減少由DVR注入的有功功率。因此，最小有功注入法，提出了補償電壓驟降。這種方法的性能下，在配電系統平衡和不平衡電壓暫降評估。
Keywords
[1] M.H. Haque, “Compensation of distribution system voltage sag by DVR and D-STATCOM,” IEEE Power Tech Conference, Vol. 1, 5 pp. Porto Portugal, September 2001
[2] D. J. R. S. S. Kumar, S.Sasitharan, Mahesh K. Mishra, and B. Kalyan Kumar, “Unbalanced Voltage Sag Correction with Dynamic Voltage Restorer Using Particle Swarm Optimization,” IEEE India Conference, pp.400-405, Kanpur, 11-13 December 2008
[3] P. Wang, N. Jenkins and M. H. J. Bollen, “Experimental Investigation of Voltage Sag Mitigation by an advanced static var compensator,” IEEE Trans. Power Delivery, Vol. 13, No. 4, 1461–1467, October 1998.
[4] Kasuni Perera, Daniel Salomonsson, Arulampalam Atputharajah, Sanath lahakoon, “Automated control technique for a single phase dynamic voltage restorer,” International Conference on Information and Automation, pp. 63-68, Shandong, December 2006.
[5] Christoph Meyer, Rik W. De Doncker, Yun WeiLi, and Frede Blaabjerg, “Optimized Control Strategy for a Medium-Voltage DVR—Theoretical Investigations and Experimental Results,” IEEE Transaction on Power Electronics, Vol. 23, No. 6, 2746-2754, November 2008.
[6] H.M. Wijekoon, D.M. Vilathgamuwa and S.S. Choi, “Interline dynamic voltage restorer: an economical way to improve interlines power quality,” IEE Proceeding Generation, Transmission. Distribution., Vol. 15,No. 5, 513-520, September 2003.
[7] A. Sannino, M. G. Miller and M. H. J. Bollen, “Overview of voltage sag mitigation,” IEEE Power Engineering Society Winter Meeting, Vol. 4, pp. 2872–2878, January 2000.
[8] N. H. Woodley, L. Morgan, and A. Sundaram, “Experience With An Inverter-based Dynamic Voltage Restorer,” IEEE Transaction on Power Delivery ,Vol. 14, No. 3, 1181–1186, July 1999.
[9] Chen, S. and Joos, G., “Series and shunt active power conditioners for compensating distribution system faults,” Canadian Electrical and Computer Engineering Conference on, Vol. 2, pp. 1182-1186, Halifax, Mar 2000.
[10] Y.H. Song, A.T. Johns, “Flexible AC Transmission Systems (FACTS),” IEEE Power and Energy Series 30, London, UK, 1999.
[11] J. G. Nielsen and F. Blaabjerg, “A Detailed Comparison of System Topologies for Dynamic Voltage Restorers,” IEEE Transaction on Industry Applications, Vol. 41, No. 5, 1272–1280, September/October 2005.
[12] Michael John Newman, Donald Grahame Holmes, John Godsk Nielsen, and Frede Blaabjerg, “A Dynamic Voltage Restorer (DVR) With Selective Harmonic Compensation at Medium Voltage Level,” IEEE Transaction on industry application, Vol. 41, No. 6, 1744-1753, November/December 2005
[13] Yun Wei Li, D. Mahinda Vilathgamuwa., Poh Chiang Loh, and Frede Blaabjerg, “A Dual-Functional Medium Voltage Level DVR to Limit Downstream Fault Currents,” IEEE Transaction on Power Electronics, Vol. 22, no. 4, pp. 1330-1340, July 2007
[14] M. Hojo, and T. Funabashi, “Unified Power Quality Conditioner for Dynamic Voltage Restoration and Fault Current Limitation,” IEEE International Harmonics and Quality of Power Conference , pp. 1-5, Wollongong, Oct 2008
[15] X. Lei, D. Retzmann, M. Weinhold, “Improvement of power quality with advanced power electronic equipment,” IEEE Electric Utility Deregulation and Restructuring and Power Technologies, pp. 4–7, London, April 2000.
[16] J. G. Nielsen and F. Blaabjerg, “Control strategies for dynamic voltage restorer compensate voltage sags with phase jump,” in Proc. Annu.Appl. Power Electron. Conf. Exposition, 2001, no. 2, pp. 1267–1273.
[17] M.Vilathgamuwa, R. Perera, S. Choi, and K. Tseng, “Control of energy optimized dynamic voltage restorer,” in Proc. IECON, 1999, vol. 2, pp.873–878.
[18] Carl N.M. Ho and Henry S.H. Chung, “Fast Transient Control of Single-Phase Dynamic Voltage Restorer (DVR) Without External DC Source” Power Electronics Specialists Conference, 2006, PESC 37th IEEE Publication, pp.1-7.
[19] S.H. Hosseini, M.R. Banaei, “A new minimal energy control of the DC link energy in four-wire dynamic voltage restorer” IEEE Industrial Conference of Electronics Society, Vol. 3 pp. 3048-3053, 2004.
[20] H. K. Al-Hadidi, A. M. Gole and David A. Jacobson, “Minimum Power Operation of Cascade Inverter-Based Dynamic Voltage Restorer” IEEE Transactions on Power Delivery, Vol. 23, No. 2, pp. 889- 898, 2008.
[21] G.J. Li, X.P. Zhang, S.S. Choi, T.T. Lie and Y.Z. Sun, “Control strategy for dynamic voltage restorers to achieve minimum power injection without introducing sudden phase shift”
IET Generation, Transmission & Distribution, Vol. 1, No. 5, pp. 847-853, 2007.
[22] Sun Zhe, Guo ChunLin, Xu YongHai, Xiao XiangNing, Liu Yingying, Tao Shun, “A new analysis method for compensation strategy of DVR and minimum energy control”
IEEE Conference on Industrial Electronics and Applications, pp. 1321-1325, 2010.
[23] John Godsk Nielsen and Frede Blaabjerg, “A detailed comparison of system topologies for dynamic voltage restorers”, IEEE Transactions on Industry Applications, Vol. 41, No. 5, pp. 1272-1280, 2005.
[24] S. S. Choi, B. H. Li, and D. M. Vilathgamuwa , “Dynamic voltage restoration with minimum energy injection” IEEE Transactions on Power Systems, Vol. 15 , No. 1, pp. 51-57, 2000.
[25] A. D. Falehi and M. Rostami, “Verification of a Novel Proposed Control System for DVR to Correct the Voltage Sag” International Review on Modelling and Simulations, Vol. 3, No. 6, pp. 1461–1467, December 2010.
[26] Yingying Liu, Yonghai Xu, Xiangning Xiao, Chunlin Guo, “Minimum Energy Compensation Strategy and Characteristic Analysis for Dynamic Voltage Restorer” ICEET International Conference on Energy and Environment Technology, Vol. 2 pp. 172-175, 2009.
[27] Deng Pan, Chen Zhongming, Jiang Peng, Abdelkrim Benchaib, Guillaume De Preville, “Optimal compensation algorithms for a Dynamic Voltage Restorer”, International Conference on Electrical and Control Engineering, pp. 3937-3940, 2010.
[28] P. Kirawanich, R.M. Oconnell, “Experimental verification of an active power line conditioner with a fuzzy logic switch controller”, IEEE Conference on Power Electronics Specialist, Vol. 1, pp. 315-320, 2003.
[29] J. Gu, D. Xu, H. Liu, M. Gong, “Unified power quality conditioner (UPQC) the principle of control and application,” IEEE Power Conversion Conference, Vol. 1, pp. 80–85, PCC-Osaka, Aug 2002.
)