Sliding Mode Control Improvement by using Model Predictive, Fuzzy Logic, and Integral Augmented Techniques for a Quadrotor Helicopter Model

Zaeri, Amir Hossein; Esmaeilian-Marnani, Aida; Mohd Noor, Samsul

Document Type : Review Article

Authors

¹ Department of Electrical Engineering, Shahinshahr Branch, Islamic Azad University, Shahinshahr, Iran.

² Department of Electrical and Computer Engineering, Mobarakeh Branch, Islamic Azad University, Mobarakeh, Isfahan, Iran

³ Department of Electrical and Electronic Engineering, Faculty of Engineering, University Putra Malaysia, Serdang, Malaysia.

Abstract

In this paper, a new control method is adopted based on merging multi-input integral sliding mode control with boundary layer (ISMC-BL), model predictive control (MPC), and fuzzy logic control (FLC). The aim of this merging is to take advantage of MPC ability to deal with constraints and to gain optimal solution. Moreover, FLC is considered in designing the sliding surface based on fuzzy rules and tracking error. This method is simulated on a nonlinear quadrotor helicopter model. The results reveal that the proposed control approach, which is a multi-input model predictive fuzzy integral sliding mode control with boundary layer (MPFISMC-BL), is a robust, stable, optimal, and intelligent control scheme. This finding can contribute to improve the control of similar systems.

Keywords

References

REFERENCES

[1] Jia, Zhenyue, Jianqiao Yu, Yuesong Mei, Yongbo Chen, Yuanchuan Shen, and Xiaolin Ai. “Integral backstepping sliding mode control for quadrotor helicopter under external uncertain disturbances,” Aerospace Science and Technology, vol. 68, pp. 299-307, 2017.

[2] Sumantri, Bambang, Naoki Uchiyama, and Shigenori Sano. “Least square based sliding mode control for a quad-rotor helicopter and energy saving by chattering reduction.” Mechanical Systems and Signal Processing, vol. 66, pp. 769-784, 2016.

[3] Amir Hussain Zaeri, Aida Esmailian-Marnani, and Samsul Bahari Mohd Noor. “Improving Experimental Performance of Sliding Mode Control for a Two-Degree-of-Freedom Helicopter,” Majlesi Journal of Mechatronic Systems, vol. 6, no. 2, pp. 1-18, 2017.

[4] Modirrousta, Alireza, and Mahdi Khodabandeh. “Adaptive second order terminal backstepping sliding mode for attitude control of quadrotor with external disturbances,” Majlesi Journal of Electrical Engineering, vol. 9, no. 2, pp. 51-58, 2015.

[5] Toloei, A. R., M. Pirzadeh, and A. R. Vali. "Design of predictive control and evaluate the effects of flight dynamics on performance of one axis gimbal system, considering disturbance torques." Aerospace Science and Technology, vol. 54, pp. 143-150, 2016.

[6] Suprijono, Herwin, and Benyamin Kusumoputro. “Direct inverse control based on neural network for unmanned small helicopter attitude and altitude control,” Journal of Telecommunication, Electronic and Computer Engineering (JTEC). Vol. 9, no. 2-2, pp. 99-102, 2017.

[7] Raharja, Nia Maharani, Oyas Wahyunggoro, and Adha Imam Cahyadi. “Altitude control for quadrotor with mamdani fuzzy model.” In Science in Information Technology (ICSITech), 2015 International Conference on, pp. 309-314. IEEE, 2015.

[8] Sabzevari, Danial, Sayed Mohammad Kargar, and Sayed Mohammad Ali Zanjani. “Mathematical modeling and designing PID controller for a Quadrotor and optimize its step response by Genetic Algorithm.” Majlesi Journal of Electrical Engineering, vol. 10, no. 4, 2016.

[9] Raffo, Guilherme V., Manuel G. Ortega, and Francisco R. Rubio. “An integral predictive/ nonlinear H∞ control structure for a quadrotor helicopter,” Automatica vol. 46, no. 1, pp. 29-39, 2012.

[10] H. Bouadi, M. Bouchoucha, and M. Tadjine, “sliding mode control based on backstepping approach for an UAV type-quadrotor,” International Journal of Applied Mathematics and Computer Sciences, vol. 4, no. 1, pp. 12-17, 2007.

Sliding Mode Control Improvement by using Model Predictive, Fuzzy Logic, and Integral Augmented Techniques for a Quadrotor Helicopter Model

References

References

Volume 13, Issue 4 - Serial Number 4December 2019Pages 25-37

Volume 13, Issue 4 - Serial Number 4
December 2019
Pages 25-37