Simultaneous Tuning of Static Synchronous Series Compensator and Multi-Band Power System Stabilizers to Mitigate Sub-Synchronous Resonances in Power Systems

Moazzami, Majid; Fayazi, Hassan; Fani, Bahador; Jalali, Shadi; Shahgholian, Ghazanfar

Document Type : Review Article

Authors

Department of Electrical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran

Abstract

In this paper, the concept of simultaneous tuning of static synchronous series compensators and multi-band power system stabilizers for damping out sub-synchronous resonances in a series compensated power system is presented. To achieve an effective damping effect, a supplementary sub-synchronous damping controller is added to the static synchronous series compensator. The teaching-learning-based optimization algorithm is employed for the simultaneous adjustment of the parameters of both the supplementary sub-synchronous damping controller and the power system stabilizer. The proposed method is executed on the IEEE Benchmark system and simulation results are provided to verify its capability in removing sub-synchronous resonances and maintaining the stability of the underlying system.

Keywords

References

[1] IEEE Sub synchronous Resonance Working Group. Terms, “definitions and symbols for sub synchronous oscillations,”IEEE Trans. Power App. Syst, vol. 104, pp. 1326–1334, 1985.

[2] D. Koteswara Raju, Bhimrao S. Umre, Anjali S. Junghare, B. ChittiBabu, “Mitigation of Sub synchronous Resonance with Fractional-order PI based UPFC controller,” Mechanical Systems and Signal Processing, Vol. 85, pp.698–715, 2017.

[3] F. C. Jusan, S. Jr. Gomes, G. N. Taranto, “SSR results obtained with a dynamic phasor model of SVC using modal analysis,” Electr. Power Energy Syst, Vol. 32 , pp. 571–582, 2010.

[4] R. A. Pahlavani, H. A. Mohammadpour, “Damping of sub-synchronous resonance and low-frequency power oscillation in a series-compensated transmission line using gate-controlled series capacitor,” Electr. Power Syst. Res, Vol. 81, pp. 308–317, 2011.

[5] K. R. Padiyar, N. Prabhu, “Design and performance evaluation of sub synchronous damping controller with STATCOM,” IEEE Trans. Power Deliv, Vol. 21, pp. 1398–1405, 2006.

[6] M. Alomari, J. G. Zhu, “Bifurcation control of sub synchronous resonance using TCSC,” Commun. Nonlinear Sci. Numer. Simul,Vol. 16, pp. 2363–2370, 2011.

[7] T. K. C. Sindhu, M. P. Nandakumar, E. P. Cheriyan, “Adaptive RTRL based neuro controller for damping sub synchronous oscillations using TCSC,” Eng. Appl. Artif. Intell, Vol. 24, pp. 60–76, 2011.

[8] S. Panda, “Multi-objective evolutionary algorithm for SSSC-based controller design,” Electr. Power Syst. Res, Vol. 79,pp. 937–944, 2009.

[9] G. N. Pillai, A. Ghosh, A. Joshi, “Torsional interaction studies on a power system compensated by SSSC and fixed capacitor,” IEEE Trans. Power Deliv, Vol. 18, pp. 988–993, 2003.

[10] M. El. Moursi, A. M. Sharaf, K. El-Arroudi, “Optimal control schemes for SSSC for dynamic series compensation,” Electr Power System Res, Vol. 78, pp. 646–656, 2008.

[11] J. Chen, T. T. Lie, D. M. Vilathgamuwa, “Damping of power system oscillations using SSSC in real-time implementation,” Electr Power Energy Syst, Vol. 26,pp. 357–364, 2004.

[12] H. Verdejo, D. Gonzalez, J. Delpiano, C. Becker, “Tuning of Power System Stabilizers using Multi objective Optimization NSGA II,” IEEE Latin America Transactions, Vol. 13, pp. 2653-2660, 2015.

[13] V. S. Vakula, K.R. Sudha, R. Vijayasanthi, “Particle Swarm Optimization in Fine Tuning of PID Fuzzy Logic Power System Stabilizer,” Advances in Computing, Control, and Telecommunication Technologies, pp. 356-358, 2009.

[14] A. Khodabakhshian, R. Hemmati, M. Moazzami, “Multi-band power system stabilizer design by using CPCE algorithm for multi-machine power system,” Electric Power Systems Research, Vol. 101,pp. 36–48, 2013.

[15] Ch. E. Prasad, Sh. Vadhera, “Fuzzy logic based SSSC as sub-synchronous resonance damping controller,” International Conference on Energy, pp. 1–4, .2015.

[16] S. Panda, “Multi-objective evolutionary algorithm for SSSC-based controller design. Electr,” Power Syst. Res, Vol.79, pp. 937–944, 2009.

[17] D. Rimorov, I. Kamva, “Model-based tuning approach for multi-band power system stabilizers PSS4B using an improved modal performance index,” IET Gener. Transm. Distrib, Vol. 9,pp. 2135–2143, .2015.

[18] S. J. Patel, A. Toshniwal, V. Kheraj, “A novel teaching-learning based optimization approach for design of broad-band anti-reflection coating,” Swarm Evol. Comput, Vol. 34, pp. 68-74, 2017.

[19] R. V. Rao, V. J. Savsani, D. P. Vakharia, “Teaching–learning-based optimization: A novel method for constrained mechanical design optimization problems,” Computer-Aided Design, Vol. 43, pp. 303-315, 2011.

[20] D. J. Kim, Y. H. Moon, “SSR Small-Signal Stability Analysis Program of Power Systems and its Application to IEEE Benchmark Systems,” Power Tech, pp. 161–166, 2007.

[21] R. G. Farmer, Chairman, “Second benchmark model for computer simulation of sub synchronous resonance,” IEEE Power Engineering Review, Vol. 5, pp. 1057-1066, 1985.

[22] L. D. S. Coelho, “Tuning of PID controller for an automatic regulator voltage system using chaotic optimization approach,” Chaos Solitons Fractals. Vol. 39, pp. 1504–1514,2009.

[23] M. Farahani, “Damping of sub synchronous oscillations in power system using static synchronous series compensator,” IET Gener. Transm. Distrib, Vol. 6, pp. 539-544, 2012.

Majlesi Journal of Electrical Engineering

Simultaneous Tuning of Static Synchronous Series Compensator and Multi-Band Power System Stabilizers to Mitigate Sub-Synchronous Resonances in Power Systems

References

References

Volume 13, Issue 4 - Serial Number 4
December 2019
Pages 89-98

Simultaneous Tuning of Static Synchronous Series Compensator and Multi-Band Power System Stabilizers to Mitigate Sub-Synchronous Resonances in Power Systems

References

References

Volume 13, Issue 4 - Serial Number 4December 2019Pages 89-98

Volume 13, Issue 4 - Serial Number 4
December 2019
Pages 89-98