Document Type : Reseach Article
Authors
- Saeed Daneshmand 1
- Luis Andres Barboza-Arenas 2
- Asaad.A.H AlZubaidi 3
- Jamal K. Abbas 4
- M. Abdulfadhil Gatea 5
1 Department of Mechanical Engineering, Majlesi Branch, Islamic Azad University, Isfahan, Iran
2 Universidad Tecnológica del Perú, Perú
3 Technical College of Engineering, Al-Bayan University, Baghdad, Iraq
4 AL-Nisour University College, Baghdad, Iraq
5 Technical Engineering Department College of Technical Engineering, The Islamic University, Najaf, Iraq.
Abstract
To fabricate ultra-fine grain structures containing high strength, accumulative roll bonding is a kind of severe plastic deformation (SPD). In the present study, magnetic Al/ Fe2O3 composites reinforced with 0, 2.5% and 5Wt.% of Fe2O3 particles have been manufactured via ARB. A uniform distribution of Iron oxide particles was achieved after the 8th cycles of ARB. Mechanical properties include (hardness, elongation, toughness) and also, magnetic and electrical properties such as magnetic saturation, magnetic permeability and magnetic residuals were studied. The presence of Fe2O3 particles improved the mechanical, electrical and magnetic properties of this kind of laminated composites. Vibrating sample magnetometer was utilized to study the magnetic properties of samples vs No. of steps.
Keywords
- [1] M Sedighi, MH Vini, P Farhadipour, “Effect of alumina content on the mechanical properties of AA5083/Al2O3 composites fabricated by warm accumulative roll bonding, ” Powder Metallurgy and Metal Ceramics, Vol. 55 (7), pp. 413-418, 2016.
- [2] Heydari Vini, M. Sedighi, “Mechanical properties and bond strength of bimetallic AA1050/AA5083 laminates fabricated by Warm-Accumulative Roll Bonding,” Canadian metallurgical quarterly, Vol. 57, pp. 169-167, 2018.
- [3] Sedighi, P. Farhadipour, M. Heydari Vini, “Mechanical properties and microstructural evolution of bimetal 1050/Al2O3/5083 composites fabricated by warm accumulative roll bonding, ” JOM, Vol. 68 (12), pp. 3193-3200, 2016.
- [4] Baniya, H. B., Guragain, R. P., Subedi, D. P. “Cold atmospheric pressure plasma technology for modifying polymers to enhance adhesion: A critical review,” Reviews of Adhesion and Adhesives, Vol.9(2), pp.269-307, 2021
- [5] Brown, P., & Mazumder, P. “Current Progress in Mechanically Durable Water‐Repellent Surfaces: A Critical Review,” REVIEWS OF ADHESION AND ADHESIVES, Vol. 9(1), pp.123-152, 2021.
- [6] Müssig, J., & Graupner, N. “Test Methods for Fibre/Matrix Adhesion in Cellulose Fibre‐Reinforced Thermoplastic Composite Materials: A Critical Review. Rev,” Adhesion Adhesives, Vol. 8, No. 2, pp.68-129, 2021.
- [7] Rakshe, S., Nimje, S. V., & Panigrahi, S. K. “Optimization of Adhesively Bonded Spar‐Wingskin Joints of Laminated FRP Composites Subjected to Pull‐Off Load: A Critical Review,” Reviews Of Adhesion And Adhesives, Vol. 8(1), pp.29-46, 2021.
- [8] Ghasemvand, M., Behjat, B., & Ebrahimi, S. “Experimental investigation of the effects of adhesive defects on the strength and creep behavior of single-lap adhesive joints at various temperatures,” The Journal of Adhesion, pp.1-17. 2022.
- [9] Zolfaghari, Z. Rafiee, “Preparation and study of surface modified ZnO nanoparticles in copoly (amid-imide) nanocomposite films containing triptycene,” J. Synth. Chem., Vol. 1, 108-115. 2022
- [10] Shojaie, “One-pot Multicomponent synthesis of pyrano[2,3-c]pyrazoles catalyzed by Copper oxide nanoparticles (CuO NPs),” J. Synth. Chem. 2022, 1, 125-131. Doi: 10.22034/jsc.2022.155286
- [11] Radhy, N., Jasim, L. “A novel economical friendly treatment approach: Composite hydrogels,” Caspian Journal of Environmental Sciences, Vol.19(5), pp.841-852. 2021.
- [12] Mansouri, M., Nademi, M., “Ebrahim Olya, M., Lotfi, H. Study of Methyl tert-butyl Ether (MTBE) Photocatalytic Degradation with UV/TiO2-ZnO-CuO Nanoparticles,” Journal of Chemical Health Risks, Vol.7(1), pp.19-32. 2017.
- [13] Dehghani Ashkezari, H., H. Sid Kalal, H. Hoveidi, M. R. Almasian, and M. Ashoor. “Fabrication of UV/TiO2 nanotubes/Pd system by electrochemical anodization for furfural photocatalytic degradation,” Caspian Journal of Environmental Sciences, Vol.15, No. 1, pp. 1-11.2017.
- [14] Ahmed, H. I., Abdulrahman, N. A. “Effect of magnetic field on the preparation of Cu doped zinc oxide nanostructures in different temperatures,” Eurasian Chemical Communications, Vol. 3(7), pp. 443-451. 2021.
- [15] Bozorgian, A., Zarinabadi, S., & Samimi, A. “Preparation of Xanthan Magnetic Biocompatible Nano-Composite for Removal of Ni^2+ from Aqueous Solution,” Chemical Methodologies, Vol.4(4), pp. 477-493.2010.
- [16] MH Vini, M Sedighi, M Mondali, “Mechanical properties, bond strength and microstructural evolution of AA1060/TiO2 composites fabricated by warm accumulative roll bonding (WARB),” International Journal of Materials Research, Vol.108 (1), pp. 53-59.2017
- [17] Dehghani, N., Babamoradi, M., Hajizadeh, Z., Maleki, A. “Improvement of Magnetic Property of CMC/Fe3O4 Nanocomposite by Applying External Magnetic Field During Synthesis,” Chemical Methodologies, Vol.4(1), pp.92-99. 2010.
- [18] Khakyzadeh, V., Rezaei-Vahidian, H., Sediqi, S., Azimi, S. B., Karimi-Nami, R. “Programming Adsorptive Removal of Organic Azo Dye from Aqueous Media Using Magnetic Carbon Nano-Composite,” Chemical Methodologies, Vol. 5(4), pp.324-330. 2021.
- [19] Moghadam Ziabari, S. A., Babamoradi, M., Hajizadeh, Z., Maleki, A. “The effect of magnetic field on the magnetic property of Agar/Fe3O4 nanocomposite,” Eurasian Chemical Communications, Vol.2(4), pp.456-464. 2020.
- [20] Dehghan, M., Tahmasebipour, M., Ebrahimi, S. “Design, fabrication, and characterization of an SLA 3D printed nanocomposite electromagnetic micro actuator,” Microelectronic Engineering, Vol. 254, pp.111695. 2022.
- [21] Dwijendra, N.K.A., Patra, I., Ahmed, Y.M. et al. “Carbonyl sulfide gas detection by pure, Zn- and Cd-decorated AlP nano-sheet,” Monatsh Chem (2022). https://doi.org/10.1007/s00706-022-02961-5
- [22] P Farhadipour, M Sedighi, MH Vini, “Using warm accumulative roll bonding method to produce Al-Al2O3 metal matrix composite, ” imeche part B, Vol. 231 (5), pp. 889-896. 2017.
- [23] M Heydari Vini, M Sedighi, M Mondali, “Investigation of bonding behavior of AA1050/AA5083 bimetallic laminates by roll bonding technique,” Transactions of the Indian Institute of Metals 71 (9), pp. 2089-2094.2018.
- [24] MH M. Sedighi, P. Farhadipour, “Influence of temperature of accumulative roll bonding on the mechanical properties of AA5083/1% Al2O3 composite,” powder metalurgy and metal ceramics, 56 (9-10),pp.496-503, 2018.
- [25] M Heydari Vini, M Sedighi, M Mondali, “Mechanical properties and microstructural evolution of AA5083/Al2O3 composites fabricated by warm accumulative roll bonding,” ADMT Journal, Vol. 9 (4), pp.13-22.2016.
- [26] Shang, Y., Dehkordi, R. B., Chupradit, S., Toghraie, D., Sevbitov, A., Hekmatifar, M., Sabetand, R. “The Computational Study of Microchannel Thickness Effects on H2O/CuO Nanofluid Flow with Molecular Dynamics Simulations,” Journal of Molecular Liquids, pp.118240. 2021.
- [27] Panchal, H., Sadasivuni, K. K., Ahmed, A. A. A., Hishan, S. S., Doranehgard, M. H., Essa, F. A., Khalid, M. “Graphite powder mixed with black paint on the absorber plate of the solar still to enhance yield: An experimental investigation,” Desalination, Vol. 520, 115349. 2021
- [28] Salimi, M., Pirouzfar, V. Kianfar, E. “Enhanced gas transport properties in silica nanoparticle filler-polystyrene nanocomposite membranes,” Colloid Polym Sci., Vol. 295, pp. 215–226. 2017.
- [29] Salimi, M., Pirouzfar, V. & Kianfar, E. “Novel nanocomposite membranes prepared with PVC/ABS and silica nanoparticles for C2H6/CH4 separation,” Sci. Ser. A, Vol. 59, pp.566–574. 2017.
- [30] H. Vini, S. Daneshmand, “Investigation of bonding properties of Al/Cu bimetallic laminates fabricated by the asymmetric roll bonding techniques”, Advances in computational design, Vol. 4 (1), pp. 33-41.2019.
- [31] Y Gao, M.H. Vini, S. Daneshmand, AA Alameri, O Benjeddou, RHC Alfilh, “Effect of Processing Parameters on Wear Properties of Hybrid AA1050/Al2O3/TiO2 Composites,” Crystals, Vol. 13 (2), pp. 335. 2023.
- [32] MH Vini, S Daneshmand, “Bonding evolution of bimetallic Al/Cu laminates fabricated by asymmetric roll bonding,” Advances in materials research: AMR, Vol. 8 (1), pp. 1-10. 2019.
- [33] MH Vini, OH Zadeh , “Significant enhancement of bond strength in the roll bonding process using Pb particles”, Journal of Materials Research, Vol. 109 (1), pp. 42-49. 2018.
)