Document Type : Review Article

Authors

AM.S.College of Engineering/Department of Electrical and Electronics Engineering

Abstract

This paper presents an investigation on the Hybrid Seven-Level (HSL) H–bridge inverter, which is used in a Distribution Static Compensator (DSTATCOM) in Power Systems (PS). Making use of HSLI has the benefits of low harmonics distortion, reduced number of switches required to achieve the seven- level inverter output over the conventional cascaded seven-level inverter, and also reduced switching losses.  In order to compensate the reactive power and suppress the total harmonics distortion (THD) drawn from a Non-Liner Diode Rectifier Load (NLDRL) of DSTATCOM, we propose a Sub-Harmonics Pulse Width Modulation (SHPWM) technique to control the switches of HSL H – bridge inverter. The D-Q reference frame theory is used to generate the reference compensating currents for DSTATCOM and proportional and integral (PI) control is used for capacitors dc voltage regulation for DSTATCOM. An HSL H–bridge inverter is considered for the shunt compensation of a 4.5 kV distribution system. The results are validated by MatLab/Simulink simulation software.

Keywords

[1] J. S Lai and F. Z. Peng,; “Multilevel converters-A new breed of power converters”, IEEE Trans. Industry Applications, vol.32, no.3, pp. 509-
[2] F. Z. Peng., J. W. McKeever and, D .J. Adams,; “A power line conditioner using cascade multilevel inverters for distribution system”, IEEE Trans. Industry Applications, vol.34, no.6, pp. 1293-1298, Nov.-Dec.1998.
[3] W. Liqiao, L. Ping, L. Jianlin and Z. Zhongchao,; “Study on shunt active power filter based on cascaded multilevel converters”, 35th IEEE Power Electr. Spec. Conf. (APEC), vol.5, pp. 3512-3516, 20-25 June 2004.
[4] B.S.Suh, G. Sinha, M.D. Manjrekar,; T.A. Lipo,”Mulilevel Power Conversion- An Overview of Topologies and Modulation Strategies”, OPTM’98 Confernce Proceedings, pp. AD-11-AD-24, 1998.
[5] M. P. Kazmierkowski and L. Malesani,; “Current control techniques for three-phase voltage-source PWM converters: A survey”, IEEE Trans.Industrial Electronics, vol.45, no.5, pp. 691-703, Oct. 1998.
[6] A. Ghosh and G. Ledwich,; “Power Quality Enhancement using Custom Power Devices”, Kluwer Academic Publisher, Boston, MA, 2002.
[7] A. Ghosh and G. Ledwich,; “Load Compensating DSTATCOM in weak AC systems”, IEEE Trans. Power Delivery, vol. 18, No. 4, pp. 1302-1309, Oct. 2003.
[8] P. K. Steimer, H.E. Gruning, J. Wuninger, E. Caroll, S.Klaka, S. Linder,;”A New Emerging Technology for High Power, Low Cost Inverters”, IEEE-IAS’98 Conference Proceedings, pp.1592-1599, 1998.
[9] H. Gruning,;”Power Electronics Circuit Arrangement having Plural Power Converters”, U.S. Patent No. 5,805,487, 1998.
[10] M.D. Manjrekar, T.A. Lipo,;”A Hybrid Mulilevel Inverters Topology for Drive Applications”, IEEE-APEC’98 Confernce Proceedings, pp. 523-529, 1998.
[11] D. N. Zmood and D. G. Holmes,; “Stationary frame current regulation of PWM inverters with zero steady-state error”, IEEE Trans. Power. Electr., vol.18, no.3, pp. 814-822, May 2003
[12] G. Carrara, S. Gardelta, M. Marchesoni,;”A new multilevel PWM method: theoretical analysis”, IEEE Trans. On power electronics Vol. 7. No. 3 , July, pp.497-505, 1992.
[13] V. Agelidis, M. Calais,;”Application specific harmonic performance evaluation of multicarrier PWM techniques”, IEEE-PESC’98 Conference Record, pp. 172-178, 1998.